Software Update

LIVESTRONG® Fitness recommends all customers update their USB firmware prior to first use. Click below on the link corresponding to your model and operating system (Windows users should click on the automated download to begin. If that fails, switch to the manual download).

Choosing the incorrect software file can adversely affect your machine. Please verify model by comparing it to the start of your serial number (Prefixes are listed below). Please call technical support at 877-548-7864 with any questions.
Example: The LS10.0T-02 is not the same as the LS10.0T

Installation Instructions

  • Automated Installation

    Windows 2000/XP/Vista/7

    NOTE: Before using the automated installer, you must purchase a USB and initialize it by inserting it into the USB port on your fitness equipment's console. After doing so, you may follow the steps below.

    1. Download the "LIVESTRONGUSB.zip" file from the link below. Open this file and extract the file "LIVESTRONGUSB.exe" inside it to a location on your computer. You may unzip the files through several different programs offered on your Operating System.
    2.   Download LIVESTRONG USB Firmware Update Application
        LIVESTRONGUSB.zip
    3. Launch the "LIVESTRONGUSB.exe" file and follow the on-screen prompts to install the firmware update application. Successful installation will add a "LIVESTRONG" program group in the "Start" menu on your Windows PC.
    4. Insert your LIVESTRONG USB flash drive into your computer and launch the "LIVESTRONG USB Firmware Update" application from the "Start" menu.
    5. Choose the model of your fitness equipment from the "Please select equipment model" drop-menu and click the "Update Firmware" button. If you are unsure which model you have, click the "Help me find my model number" button.
    6. Win Installer
    7. Once the update has completed successfully, refer to your Owner’s Manual for instructions on how to update your equipment using the new firmware on your flash drive.

    Top »

  • Manual Installation

      Model Serial Number Prefix Version Firmware File
      LS13.0T-02 Treadmill TM439 104 06 ROM.bin »
      LS10.0T-02 Treadmill TM438 104 07 ROM.bin »
      LS13.0E-02 Elliptical EP559 102 04 ROM.bin »
      LS10.0E-02 Elliptical EP558 102 04 ROM.bin »
      LS13.0T Treadmill TM407 103 09 ROM.bin »
      LS10.0T Treadmill TM406 104 12 ROM.bin »
      LS8.0T Treadmill TM641 | TM652 102 09 ROM.bin »
      LS13.0E Elliptical EP544 107 12 ROM.bin »
      LS10.0E Elliptical EP542 107 12 ROM.bin »
      LS7.0B Recumbent Bike RB142 102 08 ROM.bin »
      LS6.0R Recumbent Bike RB004 | RB010 102 03 ROM.bin »
      LS5.0U Upright Bike CB008 | CB013 102 03 ROM.bin »

    Windows 2000/XP/Vista/7

    1. Right-click and choose "Save as..." or "Save link as..." on the corresponding “ROM.bin” file above for your treadmill, elliptical or bike to download to your computer. NOTE: If you are prompted to "Open" or "Save" the file, choose the "Save" option, not "Open."
    2. Insert your LIVESTRONG USB flash drive, allowing a few seconds for it to be installed into your computer. After installation has completed, you may see a new screen containing the contents of the flash drive. If so, you may skip to step 4.
    3. Using Windows Explorer (found either through My Computer or the shortcut Windows Key + E), select the appropriate drive. This is often “E:\” but can be any drive letter.Win Find Drive
    4. Open the “LS” folder. Here you will find a folder named “FW”.Win Drive POP
    5. If the “FW” folder does not exist, create a new folder named “FW” by right-clicking the “LS” folder and selecting New > Folder. Name the new folder “FW”.Win New Folder
    6. Copy the ROM.bin file to your “FW” folder. You can drag and drop the file directly to the folder. Win New Folder
    7. That’s it! Your LIVESTRONG USB flash drive now contains the new firmware needed to update your equipment. Refer to your Owners Manual for instructions on how to update your equipment using the new firmware copied to your USB drive.

    Top »

    Mac OS

    1. Click on the corresponding “ROM.bin” file above for your treadmill to download to your computer.
    2. Insert your LIVESTRONG USB flash drive, allowing a few seconds for it to be installed into your computer.
    3. By using the Finder tool, locate the flash drive in the “Devices” section.
    4. Open up the “LS” folder and look for a folder named “FW”.
    5. If “FW” does not exist, create a new folder by selecting File > New Folder, and name the folder “FW”.
    6. Copy the ROM.bin file to your “FW” directory.
    7. That’s it! Your LIVESTRONG USB flash drive now contains the new firmware needed to update your equipment. Refer to your Owners Manual for instructions on how to update your equipment using the file copied to your USB drive. Mac Copy

    Top »

  • LS15.0T / LS15.0E Installation

      Model Version Firmware File
      LS15.0T-01 Treadmill 103 33 S103-33.zip »
      LS15.0E-01 Elliptical 103 33 S103-33.zip »

    Windows 2000/XP/Vista/7

    1. Click on the corresponding ".zip" file above for your fitness equipment to download to your computer.
    2. Insert your USB flash drive, allowing a few seconds for it to be installed into your computer.
    3. By using the Finder tool, locate the flash drive in the "Devices" section.
    4. Extract the ".zip" file to your USB drive.
      • Right click on the ".zip" file and select "Extract All..."
      • Click "Browse..." and select your USB device.
    5. Your USB flash drive now contains the new firmware needed to update your equipment.
    6. Remove the USB from your computer and insert it into your equipment's USB port and follow the instructions to update the firmware just copied to your USB drive.

    Mac OS

    1. Click on the corresponding ".zip" file above for your fitness equipment to download to your computer.
    2. Insert your USB flash drive, allowing a few seconds for it to be installed into your computer.
    3. By using the Finder tool, locate the flash drive in the "Devices" section.
    4. Extract the ".zip" file to your USB drive.
      • Double click on the ".zip" file. The files will be extracted to a new folder
      • Move the files inside the folder to your USB device.
    5. Your USB flash drive now contains the new firmware needed to update your equipment.
    6. Remove the USB from your computer and insert it into your equipment's USB port and follow the instructions to update the firmware just copied to your USB drive.

    Top »